Bluewire Motorsport
shoping bag
Your
shopping
bag is
empty!
HOLDEN COMMODORE VT VX VY VZ VE REVERSE PARKING SYSTEM
The BWMS Reverse Sensor unit is activated when reverse gear is engaged.
As the vehicle is reversed. When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps.
As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 40 centimetres from the obstruction the bleeps become a continuous solid tone.
The sensors detect it and bounce signals back to the control unit, which in turn activates the 100db alarm buzzer.
1 .Buzzer Type.
2 .4 sensors system.
3. Operating voltage rating: DC12V.
4 .Max power: Pmax<5W.
6. Alarm Distance: 0.1m~1.5m.
7. Alarm: >100dB.
8. Ultrasonic frequency: 40KHz.
You can Paint your sensors to match your cars colour if you choose to.
We recommend you use a plastic primer plus two thin top coats of matching colour spray paint (do NOT apply with a brush). A coat of lacquer can be applied for metallic colours
Most auto dealers have the spray cans that colour match to most vehicles for around $20.
The sensors detect it and bounce signals back to the control unit, which in turn activates the 100db alarm buzzer.
1 .Buzzer Type.
2 .4 sensors system.
3. Operating voltage rating: DC12V.
4 .Max power: Pmax<5W.
6. Alarm Distance: 0.1m~1.5m.
7. Alarm: >100dB.
8. Ultrasonic frequency: 40KHz.
Black is stocked and available for immediate delivery.
You can Paint your sensors to match your cars colour if you choose to.
We recommend you use a plastic primer plus two thin top coats of matching colour spray paint (do NOT apply with a brush). A coat of lacquer can be applied for metallic colours
Most auto dealers have the spray cans that colour match to most vehicles for around $20.
Maintenance
No routine maintenance or adjustment is required. Dirt or frost accumulated on the sensors may cause the system to activate incorrectly. Clean carefully with a soft cloth. Do not use chemicals or spirits. Applying hot water in frozen conditions may damage the sensors. The sensors can be washed carefully with warm soapy water![]() |
![]() |
![]() |
![]() |







